蘑菇官方网站进入IOS,蘑菇网站成人,蘑菇视频APP污,成人蘑菇视频免费观看

Newage KB布氏硬度計的詳細資料

Newage KB布氏硬度計

Newage 的 KB係列為輕巧便攜的布氏硬度計。它們適用於幾乎任何尺寸和形狀的金屬樣品。

Newage KB布氏硬度計

In order to prevent undue wear on the elevating screws and gears， it is important to keep the  
Base free from dirt and grit. It is recommended that the Base be cleaned with spirits or other
cleaning fluid regularly and sufficient oil be applied to the elevating screwsto provide lubrication.
When making tests， always be sure that the ball retainer is tight. This will prevent damage to
the machine and insure accurate tests. The 10mm. ball should be replaced from time to time
as wear occurs. To replace ball， unscrew retainer and insert new ball.
It is very important that the ram be pushed back as far as it will go before making a test. This
may require considerable pressure on the crank， especially with a new machine. It is equally
important to make sure that the ram does not get pumped down at any time more than 5/16 If.
Ifthe ram is pumped down further， air may enter the hydraulic system and the Test Head will
no longer be calibrated correctly. Air in the hydraulic system can be removed as explained in
Directions for Changing Oil， in the maintenance manual， page 2.
On older machines， examine the Test Head periodically for oil leakage around moving parts，
packing nuts and set screws. If excessive oil leakage is apparent， it may be necessary to replace
a-rings and to change the hydraulic oil.
When servicing or repairing the Test Head， it is recommended that all severely worn parts be
replaced with new parts. It is important that all nuts with worn threads or slots be discarded
and replaced in order to facilitate reassembly and to minimize further repairs.

該產品由深圳市蘑菇官方网站进入IOS電子科技有限公司提供，銷售商地址位於深圳市南山區前海路振業國際商務中心1206。請您仔細閱讀產品使用說明書，正確使用。

如果想試用該產品，請以下單位： 

蘑菇官方网站进入IOS電子主要銷售通信設備、儀器儀表、電力設備、熱工儀表、校準設備及工具配件。